BendPak PL-6000DC 2-Post Parking Lift / Shared Columns 6,000 lbs

Supersedes PL-7000DLX

The PL-6000DC dual-column parking lift is designed to accommodate a wide array of vehicles including SUVs, sedans, and sports cars. It offers the perfect combination for both long-term and short-term parking. Typically long-term parking is the upper level and short-term parking below. The PL-6000DC was specifically designed to accommodate the needs of real estate developers, architects, engineers, automotive dealers, and commercial parking operators. The PL-6000DC can be installed inside a typical 8-foot parking space and accommodate most cars and light trucks. They operate in both indoor and outdoor locations.

Low Operating Cost
Platform driven by gravity when lowered. No electric motor consumption is required.

Fast and Easy Installation
Installation is fast and easy. Detailed installation manual is provided along with floorplan and foundation drawings and video attached with products will help customers have easier installation work.

Ganged/Shared Columns
The posts can be shared which allows multiple installations in minimum space and reduces cost.

Professional Packing & Delivery
Professional packaging and our experienced logistic team ensures customers will get the product damage free. Compact package size means simple unloading and handling.

Dependable Hydraulic Operation
The PL-6000DC features dual telescoping direct-drive cylinders eliminating the need for lifting chains or screw mechanisms and offer better reliability, smoother operation and less maintenance costs.

Automatic Safety Device
Powerful load-holding devices automatically engage and lock the lift structure as the parking lift raises, preventing sudden free fall in the unlikely event of a suspension component failure. Typically, after the lift is raised to the required working height, operators are instructed to lower the lift until it is resting safely on the locks to minimize wear on suspension components.

Photocell Sensor
Photocell sensor prohibits lift to be lowered if vehicle is parked below.

• Ganged column design allows multiple installations in minimum space
• Commercial grade design and construction
• Galvanized and corrugated anti-slip platform
• Freestanding design when ganged two or wide
• Overhead power unit provides smooth quiet hydraulic operation
• Designed for installation on typical parking surfaces
• Platform can be stopped at different heights to fit various vehicles and ceiling heights
• Full width channel-locked center panels protect lower vehicle
• Wide deck platform accommodates pickups, vans and cars.
• Dual direct-drive hydraulic cylinders
• Automatic safety lock combined with anti-fall device hold platform securely
• Maintenance free composite carriage bearings
• Electric key switch for security and safety
• Automatic shut-off when operator releases key switch
• Manual lock release available in case electricity failure (OPTIONAL)
• Hydraulic overloading protection
• Photocell sensor prohibits lift to be lowered if vehicle is parked below

Safety Features

• Mechanical safety locks are spaced every 4 inches
• 24v operator controls and lock release
• Photocell sensor prohibits lift to be lowered if vehicle is parked below
• Electric protection for power overload or improper voltage
• Automatic locking system during power outage
• Emergency stop button
• Upper limit switch
• Pressure relief valve and pressure compensated flow control valve to ensure safe operation and level lifting
• Industrial-grade hydraulic cylinders feature a single-piece, pilot fitted, machined steel piston, wrapped with specially designed, pressure loaded U-cup piston seals, backups and wear bands to virtually eliminate fluid bypass

*Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV (Current Edition) or ANSI/UL 201. Consult www.autolift.org for a complete list.

BendPak lifts are supplied with concrete fasteners that meet the criteria of the American National Standard ANSI/ALI ALCTV-(Current). Buyer is responsible for all charges relating to any special regional structural or seismic anchoring requirements specified by any other agencies or codes such as the Uniform Building Code (UBC) or International Building Code (IBC).

Better Products – Better Service – Better Value

LIMITED WARRANTY. Subject to the limitations of set forth below, Warrantor warrants that the Product sold hereunder conform to Warrantor'spublished specifications. WARRANTOR MAKES NO REPRESENTATION OR WARRANTY OF ANY OTHER KIND, EXPRESS OR IMPLIED, WITH RESPECT TOTHE GOODS, WHETHER AS TO MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR ANY OTHER MATTER

• Two Years (24-Months) Warranty on the lift structure
• One Year (12-Months) Warranty on the hydraulic cylinder(s) and power unit
• One Year (12-Months) Warranty on operating components
• One Year (12-Months) Warranty on electrical components (excluding power unit)
• One Year (12-Months) Labor Warranty on site or at factory*
• One Year (12-Months) Free-Shipping** on ground-freight charges related to warranty performance

In no event will either party be liable for any damage caused by the other party's failure to fulfill its responsibilities under these terms and conditions. In no event will either party be liable for any lost profits, lost savings, incidental damage, or other economic consequential damages. All expressed and implied warranties, including the implied warranties of merchantability and fitness for a particular purpose, are limited in duration to the coverage period. No warranties, expressed or implied, will apply after this period. BendPak may modify these terms and conditions at any time by either providing the customer with written notice or posting such revised terms on www.bendpak.com. Such revised terms shall be effective thirty days from the date of such written notice or posting.

https://bendpakcs.freshdesk.com/a/tickets/new