Atlas® Automotive Equipment Garage Pro 8000 Ext-L Ex-Tall Ex-Long Service/Parking 4 Post Lift 8,000 lbs

To View Atlas 4 Post Cylinder Bleeding Procedure Click Here
(Do this immediately after installation)

Atlas® Garage Pro 8,000 EXT-L (extra long and slightly wider) Service/Storage Lift. This lift is 20 inches longer (wheelbase) and 3 inches wider than the Atlas® Garage Pro 8000 EXT. Or to compare to the original, this lift is 20 inches longer (wheelbase), 3 inches wider, and 14 inches taller than the Atlas® Garage Pro 8000! The extra runway length will accommodate almost all of the longer wheelbase pickup trucks, except duallys. This is because the dual rear wheels are TOO WIDE to fit between the column lock assemblies. Check out the Atlas® Garage Pro 9000 if you need a portable lift for your dually!

The portable Atlas® Garage Pro 8000 EXT-L includes a caster kit with polyurethane wheels. The caster kit can be installed or removed in just a matter of minutes and requires no tools.

All Atlas® portable four post lifts (8,000 lb. capacity) are designed and built for use by Mr. Homeowner or restoration shop. These lifts are not designed to work in commercial repair shops that raise and lower a lift several times per day. If you have questions about which lift will best suit your application, please contact our sales team.

8,000 lb. Capacity
Atlas® Powder Coat Finish
Diamond Plated Runways
Single Point Lock Release
Lock Ladder Design
Double Lock Safety System
Caster Kit With Polyurethane Wheels Included
Anchor Bolts Optional (Sold Separately)
Steel Approach Ramps Included
Steel Jack Tray Included
Four Plastic Drip Trays Included
Four Wheel Stops Included
Two Rubber Wheel Chocks Included
Perfect For Storing Or Working On Vehicles

Includes

1 Jack Tray
4 Plastic Drip Trays
Two Rubber Wheel Chocks
Steel Approach Ramps
1 Caster Kit With Polyurethane Wheels

Specifications	PRO 8000 EXT-L
Capacity	8,000 lbs
Lifting Height	84 1/4" (7' 1/4")
Max Clearance Under Runways	80" (6' 8")
Height of Columns	97 ½" (8' 1 ½") / 100" (8' 4") w/Bolts
Overall Width w/ Motor	116 ½" (9' 8 ½")
Overall Width w/o Motor	108" (9')
Overall Length w/Approach Ramps	227" (18' 11")
Overall Length w/o Approach Ramps	195" (16' 3")
Approach Ramps	36 3/4" (3' 3/4") x 19 5/8" (1' 7 5/8")
Runway Width	22" (1' 10")
Runway Length	185" (15' 5")
Runway Thickness	4 ½"
Width Between Runways	38" (3' 2")
Width Between Runway Rails	34" (2' 10")
Outside Runway to Outside Runway	77 3/4" (6' 5 3/4")
Size of Column	6 1/4" x 3 3/8"
Clearance Between Columns	98" (8' 2")
Base of Column	9 5/8" x 11 1/2"
Maximum Wheel Base	173" (14' 5")
Drive Thru (Outside of tire to outside of tire)	84" (7')
Cable Diameter	.350"
Gauge of Steel	6 Gauge (.1875"/ 3/16" / 4.75mm)
Motor	110V / 30 amp breaker is required.
Oil Requirement	3-5 Gallons AW32/AW46
Weight	1,900 LB.

11 Locking Positions Under Runway (+/ - 2")	11 Locking Positions Top Of Runway (+/ - 2")
19" (1' 7")	24 1/4" (2' 1/4")
25" (2' 1")	30 1/4" (2' 6 1/4")
31" (2' 7")	36 1/4" (3' 1/4")
37" (3' 1")	42 1/4" (3' 6 1/4")
43" (3' 7")	48 1/4" (4' 1/4")
49" (4' 1")	54 1/4" (4' 6 1/4")
55" (4' 7")	60 1/4" (5' 1/4")
61" (5' 1")	66 1/4" (5' 6 1/4")
67" (5' 7")	72 1/4" (6' 0 1/4")
73" (6' 1")	78 1/4" (6' 6 1/4")
79" (6' 7")	84 1/4" (7' 1/4")