CALL US TOLL FREE | 9am-6pm EST | M-F
LOCATIONS ACROSS THE NATION | TO SERVE THE ENTIRE COUNTRY
Leading Automotive Equipment Dealer Since 1987
CALL US TOLL FREE | 9am-6pm EST | M-F
LOCATIONS ACROSS THE NATION | TO SERVE THE ENTIRE COUNTRY
Leading Automotive Equipment Dealer Since 1987
QuickJack™ 5175361
Supersedes BL-7000EXT
The 7,000-lb. capacity 7000XLT is the safest, highest-capacity and longest-reaching portable car lift ever made. Vehicle types with lift points that stretch toward the edges of the wheelbase can finally be serviced by a fully collapsible, open-center car lift. Until the 7000XLT , only two-post and four-post lifts could service such vehicles. Even mid-rise lifts, while popular in many auto detailing shops and repair bays, often struggle with unique lift point spreads. Compared to other QuickJack models, the 66" lift point reach on the 7000XLT allows operator access to more trucks and SUVs than ever before.
Despite the longer, beefier construction, the 7000XLT car lift still reaches its max rise in approximately 30 seconds. A QuickJack truck/SUV adapter kit, sold separately, adds extra rise and convenience.
Like our lower-capacity portable car lifts (the 3500SLX, 5000TL and 7000TL), built-in durable urethane wheels mean the 7000XLT frames can be rolled around, indoors or outdoors, at your convenience. This is our heaviest model, but no bolts are required, and no special wiring is ever necessary.
The 76" frames are longer than our TL models (the same length as the 5000TLX), but they’re still convenient to roll and stow around the garage. An SUV or truck bed can make for perfect transportation to the track or other locations. As long as the ground is level, the assembly can be taken outdoors for use on dirt, gravel, grass, asphalt or concrete. Initial setup is fast and easy, and then it’s seconds to get from stow-to-go.
With a collapsed profile just over 3.5", the 7000XLT needs no extra support crossbeams. It’s the perfect car lift for shops with little space to spare and big vehicles to service.
Extended-Length Car Lift Design
The 5000TLX portable car lift has been redesigned to accommodate vehicles with longer wheelbases. We’ve increased the overall frame length and lift point spread by 6". As a result, the minimum lift point spread is now 6" longer, as well. Our new portable car lift design better accommodates longer wheelbases and/or extended lift point spreads.
TL minimum lift point spread: 37"
TLX minimum lift point spread: 43"
TL maximum lift point spread: 60"
TLX maximum lift point spread: 66"
TL overall frame length: 70"
TLX overall frame length: 76"
What's the difference between the NEW TLX Models vs. EXT Models?
The biggest difference between the 7000TLX and BL-7000EXT is the lifting height, which has increased 3 inches. This provides ample room to perform all the common vehicle maintenance tasks and allows you the capability to perform even the most complicated repairs.
Overall dimensions have remained the same, so you'll continue to benefit from what made QuickJack so popular in the automotive community and that is it's super-low 3" lowered height. The minimum lifting point spread did change from 31.5" to 37", but this will not make a difference to the vast majority of 7000TLX users.
Automatic Safety Locks
Features dual-position automatic safety locks on each TL frame. As the frames rise, these locks glide securely into place at mid-rise and full-rise. Disengage with a simple flip of the lock bar and your car lift is ready for a smooth descent.
Increased Lifting Height
QuickJack TL models are capable of lifting an extra 3-inches making it easier to perform vehicle maintenance tasks that are both routine and more involved. The extra room gives you more ability and versatility under the vehicle, while doing so in added comfort.
One-handed Operation
By holding the pendant control in one hand, your other hand is totally free. No cranking or bending during lifting.
There are dozens of ways to stow your QuickJack in a garage: lean them against the wall; stack them on top of each other; tuck them together under your vehicle, etc. The opportunities for easy storage are practically endless. Some people prefer to hang their frames on the wall, up and out of the way. These convenient wall hangers are the best way to make that happen.
If you'd like to hang your portable car lift frames on the wall of your garage, our exclusive hangers mount directly into a sturdy wall stud for safe, simple storage. We recommend installing these wall hangers at the same height and high enough so that the frames rest on the floor. This makes it much easier to lift and hang the frames onto the hooks of the wall hangers.
Each mount features a sleek, laser-cut QuickJack logo to provide visible proof that this is the OFFICIAL QuickJack wall mount set. These wall hangers were designed and engineered by the same minds that designed your QuickJack portable car lift, so you know rigorous testing standards were applied and unparalleled safety factors were built in. Real-world testing and advanced computer analysis were performed to ensure quality and long-term resilience.
Now in a Matte Black Powder-coat Finish
We made our wall hangers just as sleek as your QuickJack. They now ship with a very durable (yes, we tested) black powder coat finish that matches your QuickJack frames for an even better look in your garage!
We know you'll be impressed by how durable your hangers are. Plus, they look great in any garage environment. If you've been looking for a way to vertically suspend your QuickJack frames, these hangers offer the perfect solution.
Most SUVs and trucks require adapter sets for maintenance. Your portable car lift system is capable of reaching the undercarriage of virtually every vehicle that does not exceed the unit’s lift capacity. Best of all, while using SUV and truck adapters, QuickJack remains perfectly stable and secure at all times.
Take your garage lift to its max extension with as much ease as you would a Mustang or Ferrari. And if you do have a smaller vehicle to work under, it’s easy to replace the adapter set with QuickJack’s conventional stackable rubber blocks takes in no time at all. Just swap them out in the block tray and you’re done!
To support your heavy vehicles, a rugged, cross-textured base pad sits securely in the QuickJack block tray, supporting the same stackable adapters and rounded lift pad that you might see on any frame-engaging car lift. Incredible stability underlines our truck adapter design, maximizing your overall safety. To this end, QuickJack remains CE Certified when the truck adapter set is in use, which means you can enjoy a garage lift that’s truly portable and perfectly suited for light trucks and SUVs.
Why isn’t the SUV & Truck Adapters Set compatible with the BL-3500SLX?
While QuickJack's truck adapters will technically fit in the lifting trays of every model, high-stance trucks and SUVs will weigh over 3,500 lbs. This makes them unsuitable for use with the BL-3500SLX. Plus, the BL-3500SLX features a shorter frame that most likely wouldn't provide adequate balance for longer wheelbases.
We recommended the 7,000-lb. capacity BL-7000SLX or BL-7000EXT for heavy-duty lifting applications.
