CALL US TOLL FREE | 9am-6pm EST | M-F
LOCATIONS ACROSS THE NATION | TO SERVE THE ENTIRE COUNTRY
Leading Automotive Equipment Dealer Since 1987
CALL US TOLL FREE | 9am-6pm EST | M-F
LOCATIONS ACROSS THE NATION | TO SERVE THE ENTIRE COUNTRY
Leading Automotive Equipment Dealer Since 1987
BendPak 10AP-181 Package
To View or download the lift inspection guide Click Here.
Empowering the Future of EV Service
The 10APX-181 is an absolute game-changer for mechanics in tough spots. Say goodbye to discomfort and hello to a premium workspace. Built for tackling larger vehicles, the 10APX-181 PRO is your ultimate solution.
With a towering 181” overhead beam, this lift is perfect for high-roof cargo vans. Like the rest of the PRO Series, the 10APX-181 PRO offers a 10,000-lb. lifting capacity, Low-Pro™ arms, Bi-Metric™ arms, and a slew of top-notch features.
Stay ahead of the curve with BendPak’s revolutionary PRO Series two-post lifts. This series combines the best traits of modern lifts into a groundbreaking new design. The result? A lift that’s unmatched in the market, designed for rugged use, heavy loads, and exceptional safety and efficiency.
Reaching New Heights in Automotive Lifting
The PRO-Series offers the versatility of both wide and narrow installation options in a single, customizable package. These lifts are not only sturdy and secure but also feature BendPak’s Bi-Metric™ arms, which effortlessly handle both symmetric and asymmetric lifting. The 10APX-181 PRO combines simplicity with smart design, ensuring minimal maintenance costs and enhanced productivity.
As the automotive industry embraces new technologies, the future is shifting towards electric, hybrid, and solar-powered vehicles, moving away from traditional gas engines. With EVs projected to dominate future vehicle production, their increased weight poses new challenges for mechanic safety during service. The added weight stresses automotive lift components, particularly in two-post lifts.
Automatic Swing Arm Restraint System
Traditional swing arm restraints have met their match in the AP series. A standout feature is the revolutionary Automatic Swing Arm Restraint System (ASARS), engineered to endure the elevated forces exerted during vehicle service. This patented system, constructed with heavily forged steel, locks lift arms securely in place with an impressive load-holding force of over 2000 pounds. The result is unmatched stability, preventing unintended swing-arm movement during lift usage and vehicle service operations.
Safety Through Innovation
That’s where the PRO-Series comes in – specifically engineered to meet these demands. Technicians can now efficiently service EVs, including trucks, vans, and sports cars. With ultra-low-profile arms and extra-wide column spacing, these lifts provide superior under-car access. BendPak’s use of high tensile-strength steels for all critical load-bearing components ensures maximum durability and safety.
This heightened tensile strength enabled BendPak’s engineers to develop swing arms with greater telescoping movement and tube profile better suited for low ground clearance vehicles and outer-positioned EV lifting points. Throughout the design process, safety-critical enhancements were introduced to ensure optimal performance and reliability.
EVs demand specialized lifts to safely manage their increased weight from added batteries, reinforced frameworks, suspension components, and protective armor. The PRO-Series is the ideal solution, with its reinforced construction and purposefully engineered design features.
Each PRO-Series model offers enhanced under-car access, increased arm travel, and minimal arm retraction, allowing versatile lift support positioning perfect for EV service needs. Swing arm restraints have long been used on two-post lifts to prevent arms from shifting during vehicle loading and service. However, traditional systems struggled to withstand the excessive forces when vehicles shifted unexpectedly due to improper loading or changes in the center of balance from heavy drivetrain components.
Triple-Telescoping Nested Swind Arm Design
Revolutionary and patented swing arms are specifically tailored for varying vehicle lifting points. Unlike traditional two-post lift arms, 10AP arms retract shorter and extend farther; offering lift operators a myriad of lift arm positioning options ― it’s like having the best of all worlds.
The innovative three-stage arms achieve more telescoping movement due to their patented nesting feature that results in greater retraction and farther reach. Inner sliding arm movement is no longer impeded by arm end plates, tube closeouts, or even the arm pivot pin itself. The inner tubes retract fully through the back of the arm assembly end even beyond the arm pin, resulting in more achievable retraction and extension.
Low Profile Arms
BendPak's exclusive Low-Pro™ swing arms feature telescoping channels that have a shorter profile and a dropped-end pad receiver resulting in better serviceability on lowered chassis-height vehicles. They access hard-to-reach lift points with less hindrance providing increased versatility and less chance of damage to vehicle side skirts, running boards or ground effects. Varying height stackable adapters combined with two stage spin-up screw pads provide greater vertical pad placement for precise and safe vehicle support.
Revolutionary Automatic Swing Arm Restraint System
A significant design feature which sets the PRO-Series apart from the rest is its revolutionary Automatic Swing Arm Restraint System (ASARS)! This system is well-suited for heavy vehicle service and has been bolstered to withstand these elevated pushing and pulling forces that occur when vehicles are being serviced.
Featuring a full 360-degree load-holding grip, the patented forged-steel design delivers over 2000 pounds of holding force, keeping lift arms securely in place and preventing unplanned movement. This adaptive system requires minimal operator involvement and provides unmatched stability, thanks to its precision non-shifting action and quick-release operator lever for instant clamping release.
Lifting full-sized trucks or SUVs onto a two-post lift can be risky, but BendPak's Frame Cradle Pads minimize that risk. These rugged pads ensure your vehicle only goes up and over when you decide. Built to last, Frame Cradle Pads feature heavy-duty steel and thick polyurethane rubber pad linings that endure heavy use. The textured surface protects your chassis frame from damage and reduces slippage, enhancing safety. With 35 mm or 60 mm diameter pins, these pads easily fit into our two-post lift arms.
The Perfect Air Supply for Your Lift
The WSA-100 air-electric workstation, the ultimate utility station for your shop. This powerhouse comes equipped with four electrical outlets and two specialized air service outlets, giving your workspace the versatility it needs to thrive.
The air service includes a pressure gauge and two outlets: one for lubricated air for tire inflation and another for clean air for pneumatic tools. An integrated filtration system ensures only clean air circulates in your workspace.
The four 110V electrical outlets feature 20-amp industrial GFI protection, perfect for powering any tool you need. Large hooks keep electrical cords neatly organized and offer extra storage space. Easy to install and built with industrial-grade technology, the WSA-100 is just what your shop or garage needs to boost efficiency and performance.
Take shop efficiency to the next level with the 10APX-181 PRO from BendPak!
