 |
 |
 |
|
HDS-14LSX Package Includes:
BendPak HDS-14LSX4 Post Alignment Rack
To view the lift inspection guide
Click Here.
BendPak's HDS-Series alignment lifts are engineered to meet the strenuous demands of even your toughest professional lifting jobs. Designed into every HDS-Series lift is a laundry list of key features that improve safety, durability and productivity, ensuring that BendPak is the absolute best you can buy.
The HDS-14LSX is the sturdy beast you want as the backbone of your shop; especially if you specialize in servicing larger, low ground clearance vehicles. Their alignment system features front turn plates and rear slip plates built right into the runways. The wheels always respond to your adjustments with no resistance or hassle.
BendPak calls it free floating. You'll call it unbelievably easy.
The HDS-14LSX features aircraft-quality stainless steel and aluminum pneumatic cylinders that release all four locks simultaneously with the simple push of a button. The spring-loaded safety locks automatically engage continuously when raising the lift. For added safety, a second lock system acts as an automatic slack-cable device, automatically engaging in the event of an unexpected cable failure. Lifting cables, airlines, safety latches and sheaves are all fully enclosed within the lift structure.
BendPak RJ7W Rolling Bridge Jack (Set of 2)
The 7,000Lb. capacity rolling bridge jacks offer the ultimate in jacking speed and convenience. Their exclusive telescoping roller design allows the runways to be adjusted for different tread widths. Precision rollers enable you to position them anywhere under the vehicle. Perfect for wheel and suspension work. Each jack comes complete with stackable pad adapters and axle support plates.
Airline Kit
|
Model
|
HDS-14LSX
|
|
Capacity
|
|
Lifting Capacity: (*)
|
14,000 lbs. (6,350 kg)
|
|
*Max Capacity / Front Axle
|
7,000 lbs. (3,175 kg)
|
|
*Max Capacity / Rear Axle
|
7,000 lbs. (3,175 kg)
|
|
Rise
|
|
A - Min. Runway Height
|
7.625" (194 mm)
|
|
B - Max. Rise
|
70" (1,778 mm)
|
|
C - Max. Lifting Height
|
77.625" (1,972 mm)
|
|
Time to Full Rise
|
60 seconds
|
|
Outside Dimensions
|
|
D - Overall Width
|
130" (3,302 mm)
|
|
E - Outside Length
|
213" (5,410 mm)
|
|
F - Overall Length
|
241" (6,121 mm)
|
|
G - Height of Columns
|
95" (2,413 mm)
|
|
Inside Dimensions
|
|
H - Width Between Columns
|
120" (3,048 mm)
|
|
I - Drive-Thru Clearance
|
98" (2,489 mm)
|
|
Runways
|
|
J - Runway Width
|
20" (508 mm)
|
|
K - Length of Runways
|
199" (5,055 mm)
|
|
L - Width Between Runways
|
37.5" (953 mm) or 51" (1,295 mm)
|
|
Alignment
|
|
M - Min. 4-Wheel Alignment
|
89" (2,261 mm)
|
|
N - Max 4-Wheel Alignment
|
156" (3,962 mm)
|
|
O - Max 2-Wheel Alignment
|
182" (4,623 mm)
|
|
Minimum Wheelbase
|
|
Rated Capacity
|
140" (3,556 mm)
|
|
75% Capacity
|
120" (3,048 mm)
|
|
50% Capacity
|
100" (2,540 mm)
|
|
25% Capacity
|
80" (2,032 mm)
|
|
Locking
|
|
Locking Positions
|
13
|
|
Lock Spacing
|
4
|
|
Power Unit
|
|
Motor
|
220 VAC / 60 Hz / 1 Ph
|
|
Noise
|
45 dB
|
|
Shipping
|
|
Dimensions
|
209" x 23" x 42" (5,308 mm x 584 mm x 1,066 mm)
|
|
Weight
|
3,067-lbs. (1,391 kg)
|
Note - An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
Note - Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2006 or ANSI/UL 201. Consult
www.autolift.org for a complete list.
Click on Image to Enlarge or Download It
|
Specifications
|
RJ7W
|
|
Capacity
|
|
Lifting Capacity*
|
7,000 lbs. (3,175 kg)
|
|
Min. Drive-Over Height*
|
|
Max. Height + Pad Only
|
4" (102 mm)
|
|
Min. Height + Pad + 2.75" Adapter
|
6.75" (171 mm)
|
|
Min. Height + Pad + 5.5" Adapter
|
9.5" (241 mm)
|
|
Max. Lifting Height*
|
|
Max. Height + Pad Only
|
14.75" (375 mm)
|
|
Min. Height + Pad + 2.75" Adapter
|
17.5" (445 mm)
|
|
Min. Height + Pad + 5.5" Adapter
|
20.25" (514 mm)
|
|
Reach
|
|
Support Base Width
|
36.25" - 46.5" (921 mm - 1,181 mm)
|
|
Max. Arm Reach
|
56" (1,422 mm)
|
|
Min. Arm Reach
|
42" (1,067 mm)
|
|
Rise
|
|
Time to Full Rise
|
55 seconds
|
|
Pump / Air
|
|
Pump
|
Air-Hydraulic Pump
|
|
Air Pressure
|
125 PSI (10-25 CFM)
|
|
Max. Operating Hydraulic Pressure
|
4,550 PSI
|
|
Power Requirement
|
None
|
|
Shipping
|
|
Dimensions
|
42" x 25" x 15" (1,066 mm x 635 mm x 381 mm)
|
|
Weight
|
440 lbs.
|
Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
BendPak HDS-14LSX
Better Products ¨C Better Service ¨C Better Value
Duration: From the date of purchase by the original Purchaser or 60-24-12 months from the date of shipment by BendPak or whichever comes first.
a Five Years (60-Months) Bumper-to-Bumper Warranty on the lift structure
a Two Years (24-Months) Warranty on the hydraulic cylinder(s) and power unit
a One Year (12-Months) Labor Warranty on site or at factory
a One Year (12-Months) Free-Shipping* on ground-freight charges related to warranty performance
Limited Warranty
- Who gives this warranty (Warrantor): BendPak Inc., 1645 lemonwood dr. Santa Paula, CA 93060
- Who receives this warranty (Purchaser): The original Purchaser (other than for purpose of resale)
- What products are covered by this warranty: Any BendPak Two-Post or Four-Post car lift**
- What is covered under this warranty: manufacturer defects due to material and/or workmanship with the exceptions noted below.
- What is not covered under this warranty:
- Any failure that results from Purchaser¡¯s abuse, neglect or failure to operate, maintain or service product in accordance with instructions provided in the owner¡¯s manual(s) supplied
- And damage caused by overloading lift beyond rated capacity
- Items or service normally required to maintain the product, i.e. lubricants, oil, etc.
- Items considered general wear parts such as rubber pads, lifting cables, etc. unless wear or failure is a direct result of manufacturer defect due to material and/or workmanship
- Any component damaged in shipment or any failure caused by installing or operating lift under conditions not in accordance with installation and operation guidelines or damaged by contact with tools or surroundings
- Motor or pump failure caused by rain, excessive humidity, corrosive environments or other contaminants
- Rusted components due to improper maintenance or corrosive environments
- Cosmetic defects that do not interfere with product functionality
- Damage due to incorrect voltage or improper wiring
- Any incidental, indirect, or consequential loss, damage, or expense that may result from any defect, failure, or malfunction of BendPak Inc product
- Responsibilities of Warrantor under this warranty: Repair or replace, at Warrantor¡¯s option, component which is defective, has malfunctioned and/or failed to conform within duration of the warranty period. BendPak Inc. will pay reasonable labor costs for the first 12 months only
- Responsibilities of Purchaser under this warranty:
- Provide dated proof of purchase and maintenance records
- In some cases, components may be required to be shipped to the nearest BendPak Authorized Service Center. Freight costs, after 12-months, must be borne by the Purchaser.
- Use reasonable care in the operation and maintenance of the products as described in the owner¡¯s manual(s).
- When Warrantor will perform repair or replacement under this warranty: Repair or replacement will be scheduled and serviced according to the normal work flow at the servicing location, and depending on the availability of replacement parts.
*Free-shipping applies to direct shipping points within the 48 continental United States. Rural area shipping surcharge may apply for remote addresses. **For all BendPak brand two-post and four-post surface mounted lifts manufactured on or following 1/1/2011.
Limitation of Liability
In no event will either party be liable for any damage caused by the other party's failure to fulfill its responsibilities under these terms and conditions. In no event will either party be liable for any lost profits, lost savings, incidental damage, or other economic consequential damages. All expressed and implied warranties, including the implied warranties of merchantability and fitness for a particular purpose, are limited in duration to the coverage period. No warranties, expressed or implied, will apply after this period. BendPak may modify these terms and conditions at any time by either providing the customer with written notice or posting such revised terms on www.bendpak.com. Such revised terms shall be effective thirty days from the date of such written notice or posting.
|
|
|
 |
|
 |
|
Owned & Operated in the U.S. since 1987
