![](/v/vspfiles/templates/autoe dupe/images/DBox_Border_Left_Top.gif) |
![](/v/vspfiles/templates/autoe dupe/images/clear1x1.gif) |
![](/v/vspfiles/templates/autoe dupe/images/DBox_Border_Right_Top.gif) |
![](/v/vspfiles/templates/autoe dupe/images/clear1x1.gif) |
BendPak TSP-580V-601 5HP 80‐Gallon Air Compressor
The TSP-5 Patriot Series air compressor features an 80-Gallon vertical tank and 5 HP, low-RPM motor for high efficiency. Built for high productivity and lower operating costs, it produces more compressed air using an extremely efficient and low-energy-consuming components. Made in USA.
The TSP-5 is one of BendPak’s most popular made in USA air compressor models. High-quality, slow running cast iron compressor pumps deliver proven longevity in the most demanding conditions. Because they run at a slower RPM than most comparable units, they’re quieter, run cooler and cost less to operate. 100% cast iron pumps provide the quality and performance needed for heavy‐use applications like automotive and body repair to manufacturing and industrial service.
Hydraulic Pump
The two-stage, twin piston pump features splash lubrication for total reliability and a finned cylinder configuration that provides 360° cooling. Heavy‐duty, disc‐type valves are dependable and accessible without having to remove the cylinder head or perform other complicated valve maintenance procedures. A built‐in inter-cooler and air‐cooled after-cooler chill the air, resulting in reduced heat and condensation moisture.
Anti-vibration Pads
This air compressor includes a set of four rugged, half-inch thick pads to ensure there's virtually zero machine vibration during operation. The high-quality elastomer compound resists aging, compression set, water and oil.
Cooling Fan
The TSP-5 Patriot air compressor operates at low temperatures and optimizes its efficiency for maximum air output. The pump runs at a lower speed, which also reduces noise in your shop or garage. When you finally decide which air compressor best fits your needs, take into account the overall lifetime maintenance costs. This is the “true cost” of owning anything. Electric bills can accumulate quickly, and more horsepower means a higher bill. That’s exactly why the TSP-5 Elite is such a money-saver: it runs at a cool temperature and runs an efficient 5 HP motor that won’t cut deeply into your bottom line. Why get less when you can save more with the TSP-5 Elite by BendPak?
Model
|
TSP-580V-601
|
Motor
|
Horsepower
|
5 hp
|
RPM
|
1,750 RPM
|
Voltage
|
208-230 Volt AC
|
Phase
|
1 Ph
|
Hertz
|
60 Hz
|
Magnetic Starter
|
N/A
|
Amp Draw
|
24
|
Recommended Breaker
|
40 Amp Breaker
|
Noise
|
72 dBA
|
Pump
|
Style
|
2-Stage / 2-Piston / Vertical
|
Pump RPM
|
625 RPM
|
Material
|
Solid Cast Iron
|
Duty Cycle
|
Continuous
|
CFM
|
17 CFM
|
CFM Rated @
|
175 PSI
|
Max PSI
|
175 PSI
|
Oil Sight Glass
|
Yes
|
Pump Type
|
Two-Stage
|
Pump Drive
|
Belt Drive
|
Oil Type
|
Oil Lubricated
|
Oil System
|
Full Pressure Lubrication
|
Tank
|
Orientation
|
Vertical
|
Size
|
80 gallon
|
Outlet
|
3/4" Fitting
|
Electronic Drain Valve
|
Yes
|
Certification
|
UL, CSA, ASME
|
Dimensions
|
Width
|
24" (610 mm)
|
Depth
|
71" (1,803 mm)
|
Height
|
34" (864 mm)
|
Weight
|
715 lbs. (324 kg)
|
AIR COMPRESSORS WARRANTY
Duration: From the date of purchase by original Purchaser or 60-24-12 months from the date of shipment by BendPak or whichever comes first.
- Five Years (60-Months) Warranty on the compressor tank only
- Two Years (24-Months) Warranty on the compressor pump only
- One Year (12-Months) Warranty on operating components
- One Year (12-Months) Labor Warranty on site or at factory
- One Year (12-Months) Free-Shipping* on ground-freight charges related to warranty performance
Limited Warranty
- 1. Who gives this warranty (Warrantor): BendPak Inc., 1645 Lemonwood Dr., Santa Paula, CA 93060
- 2. Who receives this warranty (Purchaser): The original Purchaser (other than for purpose of resale)
- 3. What products are covered by this warranty: Any BendPak Air Compressor
- 4. What is covered under this warranty: manufacturer defects due to material and/or workmanship with the exceptions noted below.
- 5. What is not covered under this warranty:
- a. Any failure that results from Purchaser’s abuse, neglect or failure to operate, maintain or service product in accordance with
instructions provided in the owner’s manual(s) supplied or any pre-delivery service, (assembly, oil, lubricants, adjustment etc.)
- b. Items or service normally required to maintain the product, i.e. lubricants, oil, etc.
- c. Items considered general wear parts such as rubber belts, hoses, etc. unless wear or failure is a direct result of manufacturer defect due to material and/or workmanship Other items not listed but considered general wear parts; a. Pump wear or valve damage caused by using oil not specified; b. Pump or valve damage caused by any oil contamination or by failure to follow proper oil maintenance guidelines; c. Ring wear or valve damage from inadequate filter maintenance
- d. Any component damaged in shipment or any failure caused by installing or operating air compressor under conditions not in accordance with installation and operation guidelines or damaged by contact with tools or surroundings
- e. Motor or pump failure caused by rain, excessive humidity, corrosive environments or other contaminants
- f. Rusted tanks, including but not limited to rust due to improper drainage or corrosive environments. The five-year tank warranty applies to ASME air receivers only if they are installed on rubber anti-vibration pads or approved equivalent
- g. Cosmetic defects that do not interfere with product functionality
- h. Damage due to incorrect voltage or improper wiring
- i. Any incidental, indirect, or consequential loss, damage, or expense that may result from any defect, failure, or malfunction of BendPak Inc. product
- j. All electrical components are guaranteed for one year against defects in workmanship and/or materials when the lift is installed
and used according to specifications
- 6. Responsibilities of Warrantor under this warranty: Repair or replace, at Warrantor’s option, component which is defective, has malfunctioned and/or failed to conform within duration of the warranty period. BendPak Inc. will pay reasonable labor costs for the first 12 months only
- 7. Responsibilities of Purchaser under this warranty:
- a. Provide dated proof of purchase and maintenance records
- b. In some cases, components may be required to be shipped to the nearest BendPak Authorized Service Center. Freight costs, after 12-months, must be borne by the Purchaser.
- c. Use reasonable care in the operation and maintenance of the products as described in the owner’s manual(s).
- 8. When Warrantor will perform repair or replacement under this warranty: Repair or replacement will be scheduled and serviced according to the normal work flow at the servicing location, and depending on the availability of replacement parts.
*Free-shipping applies to direct shipping points within the 48 continental United States. Rural area shipping surcharge may apply for remote
addresses.
Limitation of Liability
BendPak/Ranger shall have no obligation pursuant to this Warranty with respect to products which in our sole judgment have been altered damaged, misused, abused, badly worn, lost or improperly maintained. This Warranty is null and void if the customer or any other person other than an authorized representative of BendPak/Ranger has made any attempt to service or modify the tool prior to its return to BendPak/Ranger under this Warranty. In no event will either party be liable for any damage caused by the other party's failure to fulfill its responsibilities under these terms and conditions. In no event will either party be liable for any lost profits, lost savings, incidental damage, or other economic consequential damages. All expressed and implied warranties, including the implied warranties of merchantability and fitness for a particular purpose, are limited in duration to the coverage period. No warranties, expressed or implied, will apply after this period. BendPak may modify these terms and conditions at any time by either providing the customer with written notice or posting such revised terms on www.bendpak.com. Such revised terms shall be effective thirty days from the date of such written notice or posting.
https://bendpakcs.freshdesk.com/a/tickets/new
|
|
![](/v/vspfiles/templates/autoe dupe/images/clear1x1.gif) |
![](/v/vspfiles/templates/autoe dupe/images/DBox_Border_Left_Bottom.gif) |
![](/v/vspfiles/templates/autoe dupe/images/clear1x1.gif) |
![](/v/vspfiles/templates/autoe dupe/images/DBox_Border_Right_Bottom.gif) |
![](/v/vspfiles/templates/autoe dupe/images/DBox_Border_Left_Bottom.gif) |
![](/v/vspfiles/templates/autoe dupe/images/clear1x1.gif) |
![](/v/vspfiles/templates/autoe dupe/images/DBox_Border_Right_Bottom.gif) |
![](/v/vspfiles/templates/autoe dupe/images/DBox_Border_Left_MidDiv.gif) |
![](/v/vspfiles/templates/autoe dupe/images/clear1x1.gif) |
![](/v/vspfiles/templates/autoe dupe/images/DBox_Border_Right_MidDiv.gif) |
![](/v/vspfiles/templates/autoe dupe/images/clear1x1.gif) |
Features
- Made in USA
- UL, CSA, ASME certified
- Extra-quiet, low-RPM pump
- 5 HP energy‐efficient motor
- Pressure switch ensures efficient operation at all times with no wasted energy
- Cast‐iron pump and heads are more stable under heavy workloads and do not warp from heat like aluminum cylinders with pressed‐in sleeves
- Cast‐iron Elite pump features simple splash lubrication for total reliability and a finned cylinder configuration that provides 360° cooling
- Dual drive belts require less belt tension resulting in less load on pump bearings, longer belt life and low vibration
- Fully‐enclosed belt guard
- Anti-vibration pads included
- Large surface area and cooling fins on cylinders and forced‐air after-cooler provides efficient heat dissipation for lower operating temperatures and dryer air. Compressor runs cooler, oil life is extended and maintenance is reduced
- Precision honed cylinders increase efficiency and oil control
- Oversized ductile iron crankshaft provides extra strength and longer wear
- Tapered roller main bearings provide full contact and support of the crankshaft and needle‐type piston pin bearings properly distribute bearing loads
- Precision balanced flywheel has forced‐air fan blades for optimum compressor cooling and life
- Magnetic starter provides thermal overload protection and minimizes start loads providing long life and trouble‐free operation
- ASME-rated safety valve protects the compressor from overpressure and safeguards the operator
- Balanced flywheel and counterbalanced crankshaft provides vibration‐free operation
- Readily accessible disc‐valves do not require disassembly of compressor piping for easy accessibility and reduced maintenance cost and downtime
- Corrosion resistant tubing for coolers, separators and valves for longer life and reduced maintenance
- High‐density, die‐cast aluminum alloy rods minimize reciprocating weight
- Rugged cast iron oil reservoir has convenient sight gauge glass, large oil drain and convenient fill cap
- Automatic pressure switch provides auto start and stop
- Integrated pressure unloader valves are built into the intake valve assembly on the compressor head, reducing internal pump heat from initial start‐up compression
- Pressure gauge with service valve
- Oversize replaceable air filter
|
|
![](/v/vspfiles/templates/autoe dupe/images/clear1x1.gif) |
![](/v/vspfiles/templates/autoe dupe/images/DBox_Border_Left_Bottom.gif) |
![](/v/vspfiles/templates/autoe dupe/images/clear1x1.gif) |
![](/v/vspfiles/templates/autoe dupe/images/DBox_Border_Right_Bottom.gif) |
![](/v/vspfiles/templates/autoe dupe/images/clear1x1.gif)
|