BendPak RJ45W Rolling Bridge Jack 4,500 Lbs.

Limited Time Offer Sale Price Available While Supplies Last

Limited Time Offer BendPak's Additional Hurricane Relief Rebate Valid October 9th thru November 15th! To See if You are Eligible & View Details on Additional Rebate Click Here. To View Hurricane Relief Rebate Amount for Products Click Here. To Redeem Rebate at bendpakrebates.spotplatforms.com

Sale Price: $1,975.00

You save $!

This product qualifies for FREE SHIPPING!

Product Code: BENDPAKRJ45W

Choose your options:

Delivery Options

Please select a Delivery Option(required):

No, I Don’t Have a Forklift Please Call me to Discuss Options. For Commonly Asked Questions on Shipping Click Here...

I have a forklift for unloading at my listed shipping address.

Local Freight Terminal Pick-Up "Preferred"

Residence or Business?(required):

Delivery Notice

24 Hour Delivery Notice(required):

Qty:

BendPak RJ45W Rolling Bridge Jack 4,500 Lbs.

Supersedes RBJ4500 & RJ-45

Lift 4,500 lbs. for Full Wheel Service Capability
The RJ45W rolling bridge jack is the DIY’ers dream product, and it’s ideal for any shop with the HD-9, arguably our most popular and versatile car lift. The HD-9 is the lift that many garages prefer because its optional caster kit allows operators to move it anywhere in their shop. Its compact size and reputation for safety mean this is one of the most popular car lifts ever made. Anyone interested in a four-post lift for wheel service should consider the HD-9 complete with a pair of RJ45W rolling bridge jacks.

Easy-Roll Wheels Come Standard
The RJ45W rolling bridge comes standard with easy-roll wheels that fit onto the runway channels on standard four-post lift models 7,000-lbs lifting capacity or greater and provide effortless gliding along the runways for easy positioning and adjustability. BendPak rolling bridge jack rollers are made of hardened stainless-steel and zinc plated for maximum durability.

Rubber Contact Pads
BendPak protects your vehicles by providing a non-marring rubber contact pad on the popular RJ45W rolling bridge jack. The durable design will hold up for many years of heavy use. We highly recommended purchasing the optional frame cradle set for use on trucks and SUVs.

Stackable Adapters
Once your rubber contact pads are positioned under the manufacturer-recommended lift points, you may find that high-clearance vehicles are hard to reach. The stackable adapter set comes in handy to bridge that gap and make lifting easier.

High-Pressure Hydraulic Power Unit
Attached to the rolling bridge jack is a hydraulic power unit that also features an airline with 125 psi and 10 – 20 CFM. This independent power unit is ergonomically controlled with a foot pedal attached directly to the jack.

Three Lock Levels
With three lock positions to choose from, it’s easy to find the perfect height to perform wheel and brake service. For additional height, raise the car lift to its max height, add the stackable adapters and raise the rolling bridge jack as high as it will go. Now you have more access to the undercarriage than ever before.

For use with HD-7, HD-9 & GP-9 Series Lifts
4,500 lb lifting capacity
Easy-Roll Wheels
Rubber contact pads
Stackable adapters
High-pressure hydraulic power unit
Optional air-line kit Available

Supersedes RBJ4500 & RJ-45

Specifications	RJ45W
Capacity
Lifting Capacity*	4,500 lbs. (2,041 kg)
Min. Drive-Over Height*
Max. Height + Pad Only	4.5" (114 mm)
Min. Height + Pad + 2.75" Adapter	7.25" (184 mm)
Min. Height + Pad + 5.5" Adapter	10" (254 mm)
Max. Lifting Height*
Max. Height + Pad Only	15.5" (394 mm)
Min. Height + Pad + 2.75" Adapter	18.25" (464 mm)
Min. Height + Pad + 5.5" Adapte	21" (533 mm)
Reach
Support Base Width	35.5" - 46.5" (902 mm - 1,181 mm)
Max. Arm Reach	57" (1,448 mm)
Min. Arm Reach	42" (1,067 mm)
Rise
Time to Full Rise	55 seconds
Pump / Air
Pump	Air-Hydraulic Pump
Air Pressure	125 PSI (10-25 CFM)
Max. Operating Hydraulic Pressure	2,490 PSI
Power Requirement	None
Shipping
Dimensions	41.25" x 25" x 13" (1,048 mm x 635 mm x 330 mm)
Weight	380 lbs.

^* Dimensions listed are taken from the upper surface of the suitable four-post lift runway.

Included commercial-grade air-hydraulic pump requires 125 psi and 10 – 20 CFM.

BendPak logo
Rolling Bridge Jacks Limited Warranty

Better Products – Better Service – Better Value

LIMITED WARRANTY. Subject to the limitations of set forth below, Warrantor warrants that the Product sold hereunder conform to Warrantor'spublished specifications. WARRANTOR MAKES NO REPRESENTATION OR WARRANTY OF ANY OTHER KIND, EXPRESS OR IMPLIED, WITH RESPECT TOTHE GOODS, WHETHER AS TO MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR ANY OTHER MATTER

Duration: From the date of purchase by the original Purchaser or 60-24-12 months from the date of shipment by BendPak or whichever comes first.

One Year (12-Months) Warranty on the lift structure
One Year (12-Months) Warranty on the hydraulic cylinder(s) and power unit
One Year (12-Months) Warranty on operating components
One Year (12-Months) Warranty on electrical components (excluding power unit)
One Year (12-Months) Labor Warranty on site or at factory*
One Year (12-Months) Free-Shipping** on ground-freight charges related to warranty performance

Limited Warranty

Who gives this warranty (Warrantor): BendPak Inc., 1645 lemonwood dr. Santa Paula, CA 93060
Who receives this warranty (Purchaser): The original Purchaser (other than for purpose of resale)
What products are covered by this warranty: Any BendPak Two-Post or Four-Post car lift***
What is covered under this warranty: manufacturer defects due to material and/or workmanship with the exceptions noted below.
What is not covered under this warranty:
- Any failure that results from Purchaser’s abuse, neglect or failure to operate, maintain or service product in accordance with instructions provided in the owner’s manual(s) supplied
- Any damage caused by overloading Product beyond rated capacity
- Items or service normally required to maintain the product, i.e. lubricants, oil, etc.
- Items considered general wear parts such as rubber pads, lifting cables, etc. unless wear or failure is a direct result of manufacturer defect due to material and/or workmanship
- Any component damaged in shipment or any failure caused by installing or operating lift under conditions not in accordance with installation and operation guidelines or damaged by contact with tools or surroundings
- Motor or pump failure caused by rain, excessive humidity, corrosive environments or other contaminants
- Rusted components due to improper maintenance or corrosive environments
- Cosmetic defects that do not interfere with product functionality
- Damage due to incorrect voltage or improper wiring
- Any failure that results from improper installation or use not according to specifications
- Damage caused by disasters such as fire, flood, wind, and lightning
- Damage caused by unauthorized attachments or modifications
Responsibilities of Warrantor under this warranty: Repair or replace, at Warrantor’s option, component which is defective, has malfunctioned and/or failed to conform within duration of the warranty period. BendPak Inc. will pay reasonable labor costs for the first 12 months only
Responsibilities of Purchaser under this warranty:
- Provide dated proof of purchase and maintenance records
- In some cases, components may be required to be shipped to the nearest BendPak Authorized Service Center. Freight costs, after 12-months, must be borne by the Purchaser.
- Use reasonable care in the operation and maintenance of the products as described in the owner’s manual(s).
- Immediately upon receipt of the Product, Purchaser shall inspect the same. Any claim for shortage must be made within ten days after Purchaser's receipt. All other claims, including claims for alleged defective Product, must be made within fifteen days after Purchaser learns of the facts upon which such claim is based, but in no event later than the applicable one, two or five year period specified above for the specified component (s). All claims not made in writing and received by Seller within the time periods specified above shall be deemed waived. With respect to any defects incapable of discovery until in use, all claims for anydamages or losses as a result of such defects shall be deemed waived unless made in writing and received by Seller within fifteen days after Purchaser learns of the alleged defect giving rise to the claim and after the expiration of said periods, but in no event later than the applicable one, two or five year period specified above for the specified component(s). Purchaser expressly assumes all liability for all such damages or losses, irrespective of any use which shall have taken place or whether the alleged defect shall have occurred or been discovered prior to expiration of such periods.
When Warrantor will perform repair or replacement under this warranty: Repair or replacement will be scheduled and serviced according to the normal work flow at the servicing location, and depending on the availability of replacement parts.

*As determined by Warrantor in its sole discretion**Free-shipping applies to direct shipping points within the 48 continental United States.Rural area shipping surcharge may apply for remote addresses. ***For all BendPak brand Two-Post or Four-Post Vehicle Service Lifts(excluding specialty lifts, high rise, commercial parking, material handling, or models for particular purpose) manufactured on or following1/1/2011.

https://bendpakcs.freshdesk.com/a/tickets/new

You are here:

Browse for more products in the same category as this item:

Car Lifts > Auto Lift Accessories

Misc > Promotional Specials