CALL US TOLL FREE | 9am-6pm EST | M-F
LOCATIONS ACROSS THE NATION | TO SERVE THE ENTIRE COUNTRY
Leading Automotive Equipment Dealer Since 1987
CALL US TOLL FREE | 9am-6pm EST | M-F
LOCATIONS ACROSS THE NATION | TO SERVE THE ENTIRE COUNTRY
Leading Automotive Equipment Dealer Since 1987
SnowBear® 324-081
The SnowBear® Personal series snow plow is a base line plow that is constructed the same but has a more affordable price due to the lifting mechanism.
The Personal snow plow is connected to the vehicle using a class 3 2" receiver mounting system. The class 3-2” receivers are vehicle specific and are designed to carry the load of the desired plow. In place of the receiver cups on the WinterWolf the Personal plow uses a single point 2” x 2” x 12” solid shaft with 3 depth settings to accommodate various front bumper systems.
The Personal snow plow used a custom geared winch and nylon strap to lift the snow plow blade.
The angling is done manually using a 5 position radius. The operator will need to get out of the vehicle, pull the lever and adjust the plow blade to the desired angle ensuring the pin re-engages fully into the hole.
The custom vehicle class 3-2" receiver is manufactured by a number of different manufactures. Curt and Reese being the most common. SnowBear® products are tested using a Curt class 3-2” receiver.
The Personal series snow plow includes as standard, a wireless remote, toggle switch, plow markers, skid shoes, and deflector kit.
The vehicle battery and plow electrics are protected by the 35amp breaker. The breaker does not allow more than 35 amps to serge from the battery unless incorrectly installed.
The installation period is typically 4.5 hours depending on the individual. A customer could budge 3 hours for assembly of the plow, 45 minutes for wiring the harness under the hood and approximately 45 minutes for attaching the custom vehicle mounts to the vehicle.
