Martins Industries MW-64HP Flatematic High Pressure Automatic Inflator Outlet

Designed for high-pressure tires the Flatematic High pressure automatic tire inflator can precisely inflate up to 232 psi. This one outlet automatic tire inflator once connected to the tire will automatically start inflation or deflation. Its clip-on chuck secures and makes tire inflation more productive by allowing you to work away from the tire.

The Flatematic High pressure is also nitrogen compatible and is equipped with a N2 purge cycle function which can perform up to 5 cycles. Each cycle will inflate with nitrogen up to the selected pressure then deflate to 5 psi then inflate again to the final selected pressure. For every purge cycle performed, the nitrogen purity in the tire increases.

• Inflate your high-pressure tires automatically up to 232 psi while keeping your hands free
• Wall-mounted unit with 25’ air hose to easily reach all tires on the vehicle
• Only 2 min. 20 sec. to inflate a 11R22.5 tire from 0 to 100 psi
• Loud audible signal warns you that the tire has reached the desired pressure
• 4 measurement units (psi, bar, kPa, kg/cm2)
• LCD screen & backlight
• Fixed, Wall-mounted
• High-Pressure
• Over pressure setting (OPS)
• Nitrogen compatible, (n2) purge cycles funtions

Includes

• 25’/7.6 m air hose with 1/4” NPT open chuck
• Quick connect outlet
• Air hose support hook
• M6x38 screws (5x)
• User manual

*Air compressor required
Important: compressed air contains water and oil, use proper air filter between the source and device. Failure to do so will void the warranty.

Specifications

• Material: Aluminum
• Color: Black & Yellow
• Air Compressor Required: Yes
• Air Pressure - Max Outlet: 232 psi
• Air Pressure - Max Inlet: 261 psi
• Reading Accuracy: 0.29 psi
• Airflow - Max (l/min): 2600
• Airflow - Max: 92 CFM
• Hose Qty: 1
• Hose Length: 300"
• Chuck Type: Open
• Certifications: CE
• Calibration Certified: Yes
• Autocalibration: Yes, on every unit start
• Maintenance & Calibration service:Yes
• Degree of Protection: IP66
• Temperature Range: -10 °C ~ 50 °C / 14 °F ~ 122°F
• Product Dimensions: 9" L x 10 1/2" w x 3 1/2" H
• Package Dimensions: 12 1/2" L x 12 1/4" W x 9" H
• Net Weight: 14 lbs
• Gross Weight: 17 lbs

Warranty

• 1 year

Martins Industries warrants to the original purchaser that its products are free from defects in material and workmanship. This coverage is valid for a period of 6 months to 3 years, depending on the product, starting from the billing date. The warranty will be voided if the product has sustained damage due to misuse, improper assembly, poor maintenance, any accident or any non-authorized modifications / repairs.