Huth 1685S Mitey Mate Jr Expander w/Tooling Kit

One of the handiest tools in the shop is your Mitey Mate Jr. (Model 1685S) hand-held expander that runs off of shop air. It allows you to work where the tubes are, for example right up under a vehicle. It quickly allows you to reshape existing tubes and easily fashion slip fits, expanding one pipe end to fit over another. This helps you connect virtually any pipe securely and quickly. But there are a lot of other things you can do with a Mitey Mate Jr. if you have the right tooling!

Huth redefines expanding portability and convenience with this down-sized, air-powered expanding unit. Ideal for making flares (requires part 440-flaring segment), ball joints (requires use of ball-joint segment tools), and slip connections under the vehicle or on the bench, Mitey Mate Jr. is not a lesser expander: it delivers both the power and the accuracy you demand.

Set to operate at 3200 psi (shop air pressure between 80 and 120 psi maximum - air regulator included in package) this pint-sized power-house puts 17,000 pounds of expanding force in your hands. Mitey Mate Jr. also comes with tooling to expand 1-1/2" to 2-1/2" I.D. mufflers and pipes (15/16" ID to 4" capability with additional tooling).

It also comes with Huth's unique Accu-Sizer system for right-on expansions, job after job. The expander itself, with its high-impact pistol grip, removable arbor tips and simple-to-setup bulls-eye sizing adjustments, weighs only 7 pounds. All three pieces together weigh only 34 pounds. Plus, you receive bending dies, end-finishing tooling and a Huth DVD - everything you need to start bending pipes for thousands of applications. The handy storage unit, which holds the expander, the three sement sets and one of the two detachable arbor tips, is 9" high by 10-1/2" square. The power pedal is only 8" high, 10" long, and 5" wide, and fits under the storage unit.

• Versatile: Ideal for making flares, ball joints, ans slip connections under the vehicle or on the bench
• Powerful: With 17,000 pounds of force, it delivers both the power and the accuracy you demand
• Lightweight: Only 7 pounds, (with its high-impact pistol grip, removable arbor tips and simple-to-setup bulls-eye sizing adjustments). All pieces together weight only 34 pounds
• Compact: The handy storage unit holds the expander, now four segment sets and one of the two detachable arbor tips, is 9" high by 10 1/2" square. The power pedal is 8" high, 10" long and 5" wide, and fits under the storage unit
• Set to operate at 3200 psi (shop air pressure between 80 and 120 psi maximum**)
• Expanding capacity from 1½” to 3" comes standard
• 15/16" ID - 4" ID capability with additional tooling
• The gun head weighs only 7 pounds
• All three pieces together weigh only 34 pounds

**Air regulator included in package.

Tooling Kit Includes

• Arbor # 497
• Small Arbor Tip # 498
• Large Arbor Tip # 499
• 1 ½” - 3" Tooling
• 1 ½” Segmented Expander # 472
• 2” Segmented Expander # 474
• 2 ½” Segmented Expander # 475
• 3” Segmented Expander # 476

Additional tooling is needed for 4"

Optional Tooling Available

• 477 Segment Set, 3" - 3-1/2"
• 478 Segment Set, 3-1/2" - 4"
• Ball Joint Segments
• #410 1-3/4"
• #419 2"
• #420 2-1/4"
• #421 2-1/2"
• #452 3"
• Flaring Segments
• #440 1-1/2" - 2-1/2"
• #441 2-1/2" - 3-1/2"
• Flanging segments
• Bead segments

Call our Sales Team to identify the best tube forming tooling for you!

Warranty of Huth Products

This warranty is made for the exclusive benefit of the original owner and is not transferable. There is no other warranty applicable to HUTH PRODUCTS, and no representative has any authority to make any representation, promise or agreement except as stated in the warranty.

One year warranty *

For one year from the date of invoice the Huth will repair the bender if found to be defective in material and workmanship without cost to the purchaser. Following the first 90 days from the date of original invoice, replacement parts are shipped from the seller to the purchaser freight collect. Return parts are shipped prepaid to the Huth. In effecting such repairs, the Huth may at its election, repair or replace any part which it finds to be defective. Tools and dies are warranted for a period of (90) ninety days against defect in material and workmanship.

* During the first 90 days from date of original invoice the Huth will pay freight charges for replacement of defective parts.

NOTE: Designs SUBJECT TO CHANGE WITHOUT NOTICE. Huth reserves the right to make changes and/or improvements without incurring any obligation to do so on previously sold products.