Hot2Go® RPV30E1 Hydro Vacuum® 30 GPM Water Transfer System / 120VAC

Capture and Transfer up to 1800 gallons of water per hour with the RPV30E1H Hydro Vacuum water & flood recovery vacuum system. It features a powerful, industrial 2-stage vacuum motor, and a heavy duty stainless steel pump transfers wastewater while vacuuming continues....No need to stop and dump the collection tank.

• 30 GPM / Requires 20A outlet or 3500W Generator. Specs calculated using 25' of 2" vacuum hose and 50' of 2" discharge hose
• Transfers wastewater up to 100' away
• 26G Tank - corrosion resistant, polyethylene, hexagonal tank, 1½” sludge/solids drain
• Easy to use, compact design - Easy to maintain
• Compact Size 17"W x 38"H, 56 pounds
• Install optional dry work filter (#VFBB3) for use as a high powered shop/detail vacuum.

Includes

• Lifts out, easy to clean strainer that collects large debris such as leaves and trash basket for pump protection.

Options Available

• VFBB3 (3) Dry work filter (for use as a high powered shop/detail vacuum)
• DHV50 50' x 2" Vacuum / Discharge hose
• DHV25 25' x 2" Vacuum / Discharge hose
• ATP75 Vacuum Scupper
• AHS07 Castor wheel kit
• AHS07 Dolly wheel kit with 13" pneumatic tires

Specifications

• Recover & Transfer: 30gpm
• Control Panel: Easy to use, lighted on/off switches
• Debris Strainer: 8” x 9.5” deep, 1000 micron
• Pump Out: High water level vacuum tank protection – 1½” sludge/solids drain valve
• Pump: Heavy duty transfer pump with panel mounted on/off switch
• Inlet: Requires 2” diameter vacuum hose
• Outlet: 2” diameter discharge hose recommended
• Vacuum Tank: 26 Gallon - corrosion resistant, polyethylene, hexagonal tank, 1½” sludge/solids drain
• Vacuum Motor**: 2 stage, 100 cfm, 91” sealed lift vacuum
• Power Cord: 35’ GFCI power cord included
• Power Requirements: 115v / 15amp or 3500w generator
• Dimensions: 17" W x 17" D x 38" H
• Weight: 56 lbs

* Specs are calculated using 25' of 2" vacuum hose & 50' of 2" discharge hose.
** Not intended to be fully immersed under water, consistent air introduction at the pickup is needed to prevent hydraulicing.

Warranty