Challenger CL10V3-QC Series Quick Cycle™ 2 Post Car Lift 10,000 ALI Cert.

To view the lift inspection guide Click Here.

When improved lift speed of rise and lowering time is important to your vehicle service applications, Challenger has developed a simple solution. Challenger Lifts has added Quick Cycle Lifting as an innovative and cost efficient option that will increase rise and descent speed on our most popular 10,000 lb. lifts. (Available on the CL10V3 above ground and Challenger Lifts’ EV1020 inground lifts). Quick Cycle is ideal for quick service bay applications.

Quick Cycle features an increased speed of rise from 48 seconds (standard CL10V3) to 27 seconds. This dramatic increased speed of rise is obtained by increasing the power unit motor from the standard 2hp motor to a stronger 3hp motor, and an upgraded 4.0cc pump from the conventional 2.5cc pump.

Quick Cycle also delivers an improved lowering speed of a constant 17 seconds (approximately) regardless of the weight of the vehicle. Quick Cycle’s improved lowering speed is accomplished by the addition of a variable flow control valve on each cylinder.

Available only on the CL10V3 series and EV1020 inground lifts (also available in 3-phase voltage. (Dual Pendant Controls and Bench Mount Controls currently not available).

Versymmetric® and Versymmetric® Plus CL10 series 2 post Lift

Service more vehicles and make more money with the Versymmetric® and Versymmetric® Plus CL10series 2 post lifts. Its exclusive Versymmetric® Technology provides the versatility to safely lift cars, trucks, vans and SUV's symmetrically or asymmetrically within the same service bay, within rated capacity.

With three Versymmetric® 2 post lifts productivity configurations - Max Plus Productivity, Maximum Productivity and Complete Productivity, adjustable height and width options, and custom color options, CL10series two post car lifts are the best choice for professional service facilities.

CL10series comes standard with offset 3-stage front arms allowing them to be stowed in an asymmetric lifting position, rear of the front tires. Unlike many competitor lifts, when the vehicle is driven through, the front arms are capable of directSPOT™ to the vehicle's lifting point without having to reposition the vehicle or shuffle back and forth to reach its recommended lift points.

CL10series 2 post hydraulic auto lifts provide automotive service shops with the right equipment to service the most vehicles on the road in one single auto lift service bay. It's Versymmetric® two lifts in one design makes it both a car lift (asymmetric lifting) and a truck lift (symmetric lifting). What's this really mean? Shops do not get caught in a situation where they cannot safely and properly lift a certain vehicle that comes in for service.

Click Here to see how the CL10series measures up.

The CL10series two post lift is available in these Versymmetric® Productivity Configurations:

Maximum Productivity (CL10V3)

• Industry first two post auto lift with Versymmetric® Plus offset 3-stage front arms + 3-stage rear arms
• Maximum arm sweep, reach and retraction meets the widest range of recommended lifting points
• Offset front arm provides single sweep spotting - no rolling vehicles back and forth to swing front arm clear of front tire

Max Plus Productivity (CL10V3-DPC)

• Versymmetric®: offset 2-stage front arms
• Industry first two post auto lift with Versymmetric® Plus offset 3-stage front arms + 3-stage rear arms
• Maximum arm sweep, reach and retraction meets the widest range of recommended lifting points
• Offset front arm provides single sweep spotting - no rolling vehicles back and forth to swing front arm clear of front tire
• Also includes Dual Pendant Controls, Document Caddy and Stack Adapter Kit

Conventional Controls

• Single push button powers lift up
• Two handed lowering operation - single point mechanical lock release / release valve

Other standard features include double telescoping screw pads, Heavy-Duty pulley and cable equalization system, 48" elongated carriage, rubber door guards, adjustable arm restraint shafts, single point mechanical lock release and padded overhead shut off.

• Versymmetric® 3-stage front arms and 2-stage rear arms provide a wide arm sweep for:
» Asymmetric or Symmetric lifting in the same service bay
» Uni-body design vehicles
» Vehicles with designated outside lift points
» Wider vehicles
» Low profile vehicles
» Both short and long wheelbases

• 11’ 11-7/8” standard height fits in service bay with 12’ ceiling height
• Optional 2’ column height extensions accommodate higher profile
vehicles
• Double Telescoping Screw Pads adjust to multiple heights minimizingthe need for adapters
• Rubber foot pads minimize stress to vehicles with delicate undercoatings
• Padded overhead shut off system prevents vehicle damage
• Single-point mechanical lock release system allows technician todisengage both columns simultaneously
• Rubber door guards protect vehicle from door damage
• Premium powder coat finish provides long-lasting durability
• Plated Arm Restraints and Arm Pins inhibit rust and provide long-lasting durability

Note Starting Nov 1, 2022 Challenger is implementing a paint upgrade to a Textured Formula. For full details Click here

CL10V3-QC Series Available

• CL10V3-QC
• CL10V3-2-QC 2ft Column Extension (164 in. height)
• CL10V3-3-QC 3ft Column Extension (176 in. height)

Optional Accessories

CLXP9 Low Profile Express Service Pad

• 9,000 Capacity
• Includes
• (4) 1.5 in. Rubber spotting blocks
• (4) 3 in. Rubber spotting blocks
• (2) Spotting block storage caddies

To View CLXP9 Low Profile Express Service Pad Manual Click Here.
*Note Please pay special attention to page 2 of the CLXP9-RS-SUP-A when installing

Stack Adapter Extension Kit P/N 10315
Stack Adapter Kit for 10,000 and 12,000 lb. two post and inground car and truck lifts. Drop-in style stack adapters help reach pickup points on vehicles with running boards or side steps. Simply take out the screw pad, drop in the stack adapter extension and replace screw pad to reach lifting points. Stack Adapter Extension Kit includes four 3" Stack Extensions, two 6" Stack Extensions & two Organizer Racks with hardware. Organizer racks mount to automotive lift column to keep adapters within reach. Works with all Challenger two post automotive lifts.

*Lift capacity ratings are based on loads equally distributed on all four arms.

1. Rise Height is measured with adjustable screw pads in highest position.
2. Specifications are listed with lift at maximum width and/or height settings.
3. Specifications are listed without rubber pad, for measurements with rubber pad add 1/4" (6mm).
4. Optional 3 phase electrical also available (Not available for Quick Cycle models). Specify at time of order.

Standard lift colors are Red and Blue. Optional colors available.

Optional frame engaging adapters (10314 or 10318) are REQUIRED when lifting vehicles with frame construction.

LIMITED WARRANTY

Challenger Lifts, Inc. lifts are guaranteed to the original owner. CLI shall repair or replace, at CLI option, for the full warranty period thoseparts that prove upon inspection to be defective and pay for reasonable costs of transportation and/or labor for replacement of said partsfor the warranty period stated below. This warranty shall not apply unless the product is installed, used and maintained according to CLI’sspecifications set forth in CLI’s installation, operation and maintenance instructions. Use of any unapproved parts or accessories will voidyour warranty. This limited warranty extends only to the original purchaser and is not transferable. This warranty is valid only if the producthas been registered with Challenger Lift, Inc., www.challengerlifts.com.

This warranty does not cover normal maintenance or adjustments, damage or malfunction caused by improper handling, installation,abuse, misuse, negligence, carelessness of operation, or normal wear and tear. In addition, this warranty does not cover equipment whenrepairs have been attempted or made by anyone other than a CLI authorized service representative.

This warranty is exclusive and is in lieu of all other warranties expressed or implied including any implied warranty of fitness for a particularpurpose, which implied warranties are expressly excluded. No employee, agent, representative, dealer or other person or entity isauthorized to give any warranties of any nature on behalf of CLI.

The remedies described are exclusive and in no event shall CLI, Inc. be liable for special, consequential or incidental damagesfor the breach of or delay in performance of the warranty. This warranty shall be governed by the Commonwealth of Kentucky,and shall be subject to the exclusive jurisdiction of the Court in the Commonwealth of Kentucky in the County of Jefferson.Functional parts are any wear items, as defined from time to time by Challenger Lifts. Examples include power units,cylinders, sheaves, hoses, cables, controls, etc. and may differ depending on the model of lift.

Structural parts are items, as defined from time to time by Challenger Lifts, Inc. that are not Functional Parts andinclude items like carriage, columns, arms, runways, plungers, etc. and may differ depending on the type of lift.

Note: WARRANTY CARD MUST BE COMPLETED AND RETURNED UPON INSTALLATION FOR VALIDATION or WARRANTY PERIOD WILL BEGIN FROM INVOICE DATE OF LIFT PURCHASE. WARRANTY MAY ALSO BE VALIDATED BY REGISTERING ONLINE @ challengerlifts.com/register-your-lift