Challenger CL10V3-DPC-QC ALI Cert. Versymmetric Plus 2 Post Car Lift w/Dual Pendant Power Controls & Quick Cycle

To view the lift inspection guide Click Here.

Service more vehicles and make more money with the Versymmetric® and Versymmetric® Plus CL10series 2 post lifts. Its exclusive Versymmetric® Technology provides the versatility to safely lift cars, trucks, vans and SUV's symmetrically or asymmetrically within the same service bay, within rated capacity.

With three Versymmetric® 2 post lifts productivity configurations - Max Plus Productivity, Maximum Productivity and Complete Productivity, adjustable height and width options, and custom color options, CL10series two post car lifts are the best choice for professional service facilities.

CL10series comes standard with offset 3-stage front arms allowing them to be stowed in an asymmetric lifting position, rear of the front tires. Unlike many competitor lifts, when the vehicle is driven through, the front arms are capable of directSPOT™ to the vehicle's lifting point without having to reposition the vehicle or shuffle back and forth to reach its recommended lift points.

CL10series 2 post hydraulic auto lifts provide automotive service shops with the right equipment to service the most vehicles on the road in one single auto lift service bay. It's Versymmetric® two lifts in one design makes it both a car lift (asymmetric lifting) and a truck lift (symmetric lifting). What's this really mean? Shops do not get caught in a situation where they cannot safely and properly lift a certain vehicle that comes in for service.

Quick Cycle features an increased speed of rise from 48 seconds (standard CL10V3) to 27 seconds. This dramatic increased speed of rise is obtained by increasing the power unit motor from the standard 2hp motor to a stronger 3hp motor, and an upgraded 4.0cc pump from the conventional 2.5cc pump.

Quick Cycle also delivers an improved lowering speed of a constant 17 seconds (approximately) regardless of the weight of the vehicle. Quick Cycle’s improved lowering speed is accomplished by the addition of a variable flow control valve on each cylinder.

The CL10series two post lift is available in these Versymmetric® Productivity Configurations:

Complete Productivity (CL10)

• Versymmetric®: offset 2-stage front arms
• Wide arm sweep,retraction and reach meets the recommended lifting points of most vehicles
• Offset front arm provides single sweep spotting - no rolling vehicles back and forth to swing front arm clear of front tire

Maximum Productivity (CL10V3)

• Industry first two post auto lift with Versymmetric® Plus offset 3-stage front arms + 3-stage rear arms
• Maximum arm sweep, reach and retraction meets the widest range of recommended lifting points
• Offset front arm provides single sweep spotting - no rolling vehicles back and forth to swing front arm clear of front tire

Max Plus Productivity (CL10V3-DPC)

• Versymmetric®: offset 2-stage front arms
• Industry first two post auto lift with Versymmetric® Plus offset 3-stage front arms + 3-stage rear arms
• Maximum arm sweep, reach and retraction meets the widest range of recommended lifting points
• Offset front arm provides single sweep spotting - no rolling vehicles back and forth to swing front arm clear of front tire
• Also includes Dual Pendant Controls, Document Caddy and Stack Adapter Kit

CL10V3-DPC Dual Pendant Controls

• Always within technician reach when small spotting adjustments matter the most, dual pendant power controls expedites vehicle spotting by providing an unobstructed view to lifting points
• OSHA compliant keyed lockout safety button locks out power to the lift
• Up power button raises lift
• Down power button / dual single-point mechanical lock release system lowers lift from either column

Other standard features include double telescoping screw pads, Heavy-Duty pulley and cable equalization system, 48" elongated carriage, rubber door guards, adjustable arm restraint shafts, single point mechanical lock release and padded overhead shut off.

Standard Accessories

Stack Adapter Extension Kit P/N 10315
Stack Adapter Kit for 10,000 and 12,000 lb. two post and inground car and truck lifts. Drop-in style stack adapters help reach pickup points on vehicles with running boards or side steps. Simply take out the screw pad, drop in the stack adapter extension and replace screw pad to reach lifting points. Stack Adapter Extension Kit includes four 3" Stack Extensions, two 6" Stack Extensions & two Organizer Racks with hardware. Organizer racks mount to automotive lift column to keep adapters within reach. Works with all Challenger two post automotive lifts.

Document Caddy P/N 10320, Pendant Holder P/N 10321

• Versymmetric® 3-stage front arms and 2-stage rear arms provide a wide arm sweep for:
» Asymmetric or Symmetric lifting in the same service bay
» Uni-body design vehicles
» Vehicles with designated outside lift points
» Wider vehicles
» Low profile vehicles
» Both short and long wheelbases

• 11’ 11-7/8” standard height fits in service bay with 12’ ceiling height
• Optional 2’ column height extensions accommodate higher profile
vehicles
• Double Telescoping Screw Pads adjust to multiple heights minimizingthe need for adapters
• Rubber foot pads minimize stress to vehicles with delicate undercoatings
• Padded overhead shut off system prevents vehicle damage
• Single-point mechanical lock release system allows technician todisengage both columns simultaneously
• Rubber door guards protect vehicle from door damage
• Premium powder coat finish provides long-lasting durability
• Plated Arm Restraints and Arm Pins inhibit rust and provide long-lasting durability

Includes

• 10315 Stack Adaptor Kit
• 10320 Document Caddy
• 10321 Pendant Holder

Note Starting Nov 1, 2022 Challenger is implementing a paint upgrade to a Textured Formula. For full details Click here

CL10V3-DPS-QC Series Available

• CL10V3-DPC-QC
• CL10V3-2-DPC-QC 2ft Column Extension (164 in. height)
• CL10V3-3-DPC-QC 3ft Column Extension (176 in. height)

Optional Accessory

CLXP9 Low Profile Express Service Pad

• 9,000 Capacity
• Includes
• (4) 1.5 in. Rubber spotting blocks
• (4) 3 in. Rubber spotting blocks
• (2) Spotting block storage caddies

To View CLXP9 Low Profile Express Service Pad Manual Click Here.
*Note Please pay special attention to page 2 of the CLXP9-RS-SUP-A when installing

*Lift capacity ratings are based on loads equally distributed on all four arms.

1. Rise Height is measured with adjustable screw pads in highest position.
2. Specifications are listed with lift at maximum width and/or height settings.
3. Specifications are listed without rubber pad, for measurements with rubber pad add 1/4" (6mm).
4. Optional 3 phase electrical also available (Not available for Quick Cycle models). Specify at time of order.

Standard lift colors are Red and Blue. Optional colors available.

Optional frame engaging adapters (10314 or 10318) are REQUIRED when lifting vehicles with frame construction.

LIMITED WARRANTY

Challenger Lifts, Inc. (CLI) lifts are guaranteed to the original owner. CLI shall repair or replace, at CLI option, for the full warranty period those parts that prove upon inspection to be defective and pay for reasonable costs of transportation and/or labor for replacement of said parts for the warranty period stated below. This warranty shall not apply unless the product is installed, used and maintained according to CLI’s specifications set forth in CLI’s installation, operation, and maintenance instructions. Use of any unapproved parts or accessories will void your warranty. This limited warranty extends only to the original purchaser and is not transferable. This warranty is valid only if the product has been registered with Challenger Lifts, Inc., www.challengerlifts.com.

This warranty does not cover normal maintenance or adjustments, damage or malfunction caused by improper handling, installation,abuse, misuse, negligence, carelessness of operation, or normal wear and tear. In addition, this warranty does not cover equipment whenrepairs have been attempted or made by anyone other than a CLI authorized service representative.

This warranty is exclusive and is in lieu of all other warranties expressed or implied including any implied warranty of fitness for a particular purpose, which implied warranties are expressly excluded. No employee, agent, representative, dealer or other person or entity isauthorized to give any warranties of any nature on behalf of CLI.

The remedies described are exclusive and in no event shall CLI, Inc. be liable for special, consequential or incidental damages for the breach of or delay in performance of the warranty. This warranty shall be governed by the Commonwealth of Kentucky, and shall be subject to the exclusive jurisdiction of the Court in the Commonwealth of Kentucky in the County of Jefferson.

Functional parts are considered the power units, cylinders, sheaves, sheave pins, hoses, hydraulic & pneumatic fittings, cables, adapters, latches, valves, and controls.

Structural parts are considered the carriage, columns, column extensions, overhead beams, arms, cross beams, runways, wheel stops, ramps, bolsters, sync rails, and plungers.

Note: Warranty registration must be completed online at https://www.challengerlifts.com/register-your-lift/ or warranty period will beging from invoice date of lift purchase.

Click on Image to Enlarge or Download